Minilase™ Fiber Laser Marking System
Unpack It. Plug It In. Start Marking. IT'S THAT SIMPLE!
No more complicated laser marking systems and expensive service calls. Maintenance-free Minilase™ Fiber arrives fully assembled in one box. Simply follow our “Quick Start Guide” and within minutes, you'll be set-up and ready to mark.
Minilase™ Fiber is ideal for single or multiple part marking on all metals, carbide, painted or anodized materials and plastics. Program and mark text, graphics, barcodes, 2D, Data Matrix, UID codes and more with our easy-to-use Laser Software.
Minilase™ Fiber features an on-board controller/PC. Simply connect a mouse, keyboard and monitor and immediately begin to create new laser programs and mark parts.
Minilase™ Fiber features a three-sided automatic power operator access door and power focus adjustment. A built in focus fi nder system allows for fast adjustment of varying part heights. Easy Mode™ allows for high volume batch marking with automated door close, marking and door open sequence.
»- Air-cooled, Maintenance Free Design
- Three-Sided Access Power Door
- Integrated PC/Controller - No external PC required.
- Power Focal Height Adjustment
- Large Illuminated T-slot Work Surface
- Easy Focus Finder
- Front Panel System Status Lights
- Easy-Mode with Automated Door Close, Marking and Door Open Sequence
- Ideal for marking all metals, carbide, painted/anodized materials and most plastics
- Mark text, graphics, barcodes, 2D and datamatrix codes, UID codes and more
| Input Voltage | Power Sensing 110-240 VAC 50/60Hz |
| System Dimensions | 17"W x 34"L x 24"H |
| Weight | 150 lbs |
| Max Part Size | 13.5"W x 9.5"L x 6"H |
| Marking Window | 110mm x 110mm |
| Available Ports | Monitor/Keyboard/Mouse/Ethernet/USB |
| PC | Integrated |
| Laser Source | Solid State Fiber Laser |
| Nominal Power | 10 Watt |
| Wavelenght | 1060 - 1080 nm |
| Frequency Range | 20 - 100 kHz |
| Aiming Beam | (2) Class 2M Red Diode 635nm |
| Cooling | Air Cooled |
| Warranty | 24 Months / Unlimited Hours |