Lasonall UV Laser Marking System
System Overview:
The Lasonall U.V. originates from the product range of the Lasonall family and is based on the mechanical optical architecture of Third Harmonic Generation (SHG) Intracavity Technology.
The Intracavity Technology provides an extensive life of the LBO non-linear crystal together with high beam quality and stability that is ideally used for applications which need a short wavelength (355nm).
The Lasonall U.V. uses 355nm wavelength which provides less mechanical distortion and heat affected zone (HAZ) in comparison with the IR (1064nm) wavelength radiation.
The lasers high average power and repetition rate allows the laser to cut complex shapes in silicon wafers and in fast scribing of glass.
The high performance of this laser marking system would find its optimal use in demanding material processing applications.
»| Laser Medium / Wavelength | L.B.O / 355 nm |
| Nominal Power | 3W ±5% (@ laser aperture) |
| Beam Quality | M2 < 1.5 |
| Power Stability (8 h) | <1.5% rms |
| Pulse width | 12 ns (@20 kHz) |
| Pulse Energy / Peak power | Max. 125 µJ / 10 kW |
| Frequency | 20-100 kHz |
| Maintenance intervals | 10,000 hours |
| Aiming beam | Class 2M Red Diode laser; 635 ±5nm; 3 mW |
| Power Supply | AC 90-240 V / 50-60 Hz/ 1 Ph / 700 W |
| Cooling (TEC air cooled) | Heat load 240 W (818 btu/h) |
| Operating Temperature | +10 to +35 C (46 to 95 F) |