SHOT Show 2026 was a strong showing for TYKMA Electrox, focused on how modern laser engraving systems perform in real production environments. From Cerakote Laser Imaging on titanium to robotic automation and a live system giveaway, the week highlighted practical applications, proven partnerships, and scalable solutions for manufacturers.
Laser Engraving Systems on Display at SHOT Show 2026
At SHOT Show, TYKMA Electrox showcased two Minilase XL Manual laser engraving systems configured with Precision Max technology, each featuring a 12″ x 12″ marking field.
One Minilase XL operated in the TYKMA Electrox booth, marking a large metal plate to demonstrate our proprietary calibration technology for large field marking applications. The second Minilase XL ran live in the Cerakote booth, configured specifically for Cerakote Laser Imaging and color marking on titanium pry bars.
This setup allowed attendees to see how the same laser platform adapts to different production requirements, coatings, and workflows across different booth environments.
Cerakote Laser Imaging on Titanium
In Cerakote’s booth, the Minilase XL demonstrated Cerakote Laser Imaging by marking patterns on titanium pry bars finished with Cerakote coatings. For the logo marking, the laser was tuned to ablate the Cerakote layers to expose the titanium substrate. Controlled laser heat is then used to color the titanium itself, producing a gold-toned mark directly in the metal.
This process delivers several advantages for production environments:
- Permanent markings with no inks or consumables
- High contrast and repeatability
- Seamless integration into Cerakote-coated manufacturing workflows
The live demonstration reinforced why Cerakote Laser Imaging has become a preferred solution for manufacturers combining coated parts with durable laser marking.
Automation and Robotics Integration with Minilase
TYKMA Electrox also demonstrated laser automation in action. A Minilase™ system was shown operating in automation mode, being loaded and unloaded by a UR collaborative robot.
This automated configuration was developed in partnership with In-Position Technologies and Innovative Cutting Systems, illustrating how TYKMA laser systems integrate into robotic cells and automated production lines.
The demonstration highlighted:
- Scalable laser engraving for higher throughput
- Compatibility with robotic handling systems
- Flexible integration for custom manufacturing environments
For manufacturers planning to move from manual marking to automated production, this setup provided a clear, real-world example.
For a deeper technical breakdown of automated laser marking, explore our dedicated Automation Mode overview. The page explains how TYKMA Electrox laser systems integrate with collaborative robots, PLCs, and automated production lines to enable scalable, hands-free laser engraving in manufacturing environments.
Custom Virtus Laser Giveaway with Cerakote
In collaboration with Cerakote®, TYKMA Electrox also promoted and awarded a custom Virtus laser engraver during SHOT Show 2026. The system was fully Cerakoted by Cerakote and displayed throughout the event.
On the final day of the show, the giveaway winner was contacted and invited to the booth for a live handoff, including photos and video captured on the show floor. The moment highlighted the strength of the partnership and the shared focus on delivering production-ready laser systems to customers.
Customer Conversations from SHOT Show 2026
In addition to live system demonstrations and automation showcases, TYKMA Electrox captured on-site interviews with customers throughout SHOT Show 2026. These conversations focus on real-world laser applications, production challenges, and why customers choose TYKMA Electrox systems for their operations.
The customer interview videos are currently in post-production and will be released soon. Each spotlight will provide deeper insight into how TYKMA laser engraving systems are being used on the manufacturing floor across firearms, defense, and industrial applications.
As new customer videos are published, this page will continue to be updated with additional SHOT Show 2026 content.
Laser Marking Heat Transfer Labels (Supplier Showcase)
At SHOT Show 2026, Franz Barta showcased an ink-free laser marking process for permanent heat transfer labels used in industrial textiles and protective equipment. Using a TYKMA Electrox Minilase LBL laser marking system with a 20W MOPA fiber laser, variable data such as serial numbers, sizes, and lot codes are laser marked directly into the label. The laser reacts with a proprietary pigment compound, producing high-contrast, permanent marks in seconds. This process eliminates ink and consumables while improving durability and traceability.
→ Watch the full Franz Barta laser marking demo
Spartan Blades Customer Testimonial
At SHOT Show 2026, we captured a customer testimonial with Spartan Blades highlighting how laser engraving is used in real knife production. In the video, Spartan Blades explains how they use TYKMA laser systems for deep engraving, layered artwork, and titanium color marking on production knives. By applying different DXF layers and laser parameters, they’re able to control depth, contrast, and color without inks or consumables. You can read the full customer testimonial and application breakdown in our dedicated post on laser engraving knives.
Cerakote Laser Imaging Demonstration with Precision Max™ Technology
One of the standout demonstrations at SHOT Show 2026 was live Cerakote Laser Imaging on a 19-inch firearm McMillan chassis using the Minilase™ XL MFSS laser engraving system.
Powered by Precision Max™ technology, the MFSS scan head maintained tight spot size and consistent mark placement across the full surface geometry. By leveraging dynamic focus control, the system processed each side of the Cerakoted chassis in approximately 1 minute and 15 seconds.
- No masking.
- No spraying.
- No secondary finishing.
The demonstration highlighted how manufacturers can move from coated to patterned parts in production-ready cycle times while maintaining micron-level accuracy across larger marking fields.
For a full video breakdown of the system, workflow, and applications, read the complete article here: Minilase XL MFSS Laser Engraving System with Precision Max™ Technology
Chris Reeve Knives on Laser Engraving Knives in Production
At SHOT Show 2026, we connected with Chris Reeve Knives to discuss how they use TYKMA fiber laser systems in daily production. Their Zetalase™ XL runs continuously in their facility, supporting deep engraving, model identification, steel type markings, military designations, and custom knife engravings.
As Tim Reeve explains, their laser operates “all day, every day into the night quite often.” That level of reliability is critical in a production knife manufacturing environment where marks must remain sharp even after tumbling, blasting, or coating.
We’ve published the full testimonial and breakdown here:
→ Chris Reeve Knives Testimonial from SHOT Show 2026
AxisWorks: Deep Laser Engraving & Cerakote Laser Imaging
At SHOT Show 2026, AxisWorks showcased a collaborative rifle build featuring deep laser engraving on metal components and Cerakote Laser Imaging on the stock.
Using TYKMA fiber laser systems, they handle part marking, barrel marking, and precision engraving for firearms manufacturing and defense applications.
Read the full testimonial here:
→ AxisWorks Testimonial from SHOT Show 2026
Mad Pig Customs Customer Testimonial
Mad Pig Customs, a custom lever-action rifle builder, uses their TYKMA Electrox laser system daily for laser engraving firearms, Cerakote laser imaging, and custom marking and engraving.
Their system supports compliance engraving, detailed customization, and permanent identification across their production workflow.
Read the full testimonial here:
→ Mad Pig Customs Testimonial from SHOT Show 2026
DoorGunner 47 on ATF Depth Engraving & Cerakote Laser Imaging
JJ from DoorGunner 47 shared how he’s using a 30W fiber laser for ATF-compliant depth engraving, serialized firearm components, and Cerakote laser imaging.
Eight months into production, he’s expanded into new applications while refining his workflow for firearms manufacturing.
→ DoorGunner 47 Testimonial from SHOT Show 2026
A Focus on Real Production, Not Just Demos
From hands-on laser marking and Cerakote Laser Imaging to robotic automation and collaborative partnerships, SHOT Show 2026 reinforced TYKMA Electrox’s approach to laser engraving: engineered systems built for real manufacturing environments.
Whether marking coated components, titanium parts, or integrating lasers into automated lines, the solutions shown at SHOT Show reflect how modern laser systems are actually used on the production floor.
Need a laser solution designed for your production environment?
Our team works directly with manufacturers to design, build, and configure laser engraving systems for coatings, metals, and automated workflows. Contact us today to get started!
Contact Us
Fill out the form below and one of our team members will get in contact with you as soon as possible.
0 comments
Leave a comment.